Eurotruss FD 34 Eurotruss

25 produits trouvés
Afficher par:
Popu
laire
En stock
En stock
0,50 €
Popu
laire
Spigot pour truss FD.
En stock
En stock
10,55 €
Popu
laire

Une goupille conique solide pour assembler et verrouiller vos systèmes Eurotruss FD. Livré avec le crampon de verrouillage FD-R !

En stock
En stock
3,15 €
-22%
This FD 34 square truss corner has an angle of 60 degrees. It's been TUV-tested according to the DIN 4113/VBG 70 specifications. This square truss corner is made of a highly stable aluminium alloy.
En stock
En stock
270,00 €
-46%
This FD 34 square T-piece has been TUV-tested according to DIN 4113/VBG 70 specifications. The square truss angle is made of a highly stable aluminium alloy and is perfect for the middle of a truss square.
En stock
En stock
218,00 €
-49%
This FD34 square truss has a length of 71 centimetres and with a weight of 4.26 kilograms, this lightweight section is incredibly easy to use. It's been TUV-tested according to DIN 70 4113/VBG specifications.
En stock
En stock
105,00 €
This FD 34 truss is one metre long and provides you with endless possibilities when it comes to realising creative ideas. With this truss section, you're guaranteed optimal quality for your production.
En stock
En stock
172,00 €

Ce truss carré FD 34 a deux fois une longueur d’un demi-mètre et un angle de 90 degrés. Il est contrôlé par TUV selon les spécifications DIN 4113/VBG 70.

En stock
En stock
179,00 €
With this base plate, your truss part will be firmly on the ground while the weight is also better distributed. This truss base/wall plate has been TUV-tested and is fit for FD34 truss parts.
En stock
En stock
125,00 €
This FD 34 square corner has a length of three times 50 centimetres and has been TUV-tested according to the DIN 4113/VBG 70 specifications. This square truss corner is made of a highly stable aluminium alloy.
En stock
En stock
177,00 €

Ce pont carré FD 34 a une longueur de 150 cm et un poids de 9 kilos seulement. Il a été testé par TUV conformément aux spécifications DIN 4113/VBG 70.

En stock
En stock
160,00 €
This FD 34 square T-piece has been TUV-tested according to DIN 4113/VBG 70 specifications. This square truss angle is made of a highly stable aluminium alloy and is perfect for the middle of a truss square.
Pas en stock, livrable sous 5 jours ouvrés.
5 jours ouvrés
317,00 €
This FD 34 square X-part has been TUV-tested according to DIN 4113/VBG 70 specifications. The square truss X-part is made of a highly stable aluminium alloy and features a downward as well as an upward joint.
Pas en stock, livrable sous 5 jours ouvrés.
5 jours ouvrés
499,00 €
This FD 34 square X-part has been TUV-tested according to DIN 4113/VBG 70 specifications. The square truss X-part is made of a highly stable aluminium alloy and features a downward joint.
Pas en stock, livrable sous 5 jours ouvrés.
5 jours ouvrés
416,00 €
This FD 34 square X-part has been TUV-tested according to DIN 4113/VBG 70 specifications. The square truss X-part is made of a highly stable aluminium alloy - this is the 71 x 50 version.
Pas en stock, livrable sous 5 jours ouvrés.
5 jours ouvrés
383,00 €
This FD 34 square corner has three times a length of 50 centimetres and an angle of 90 degrees. It's been TUV-tested according to the DIN 4113/VBG 70 specifications.
Pas en stock, livrable sous 5 jours ouvrés.
5 jours ouvrés
279,00 €
This FD 34 square corner has twice a length of 1 metre and an angle of 45 degrees. It's been TUV-tested according to the DIN 4113/VBG 70 specifications.
Pas en stock, livrable sous 5 jours ouvrés.
5 jours ouvrés
270,00 €
This FD 34 square truss corner has an angle of 120 degrees. It's been TUV-tested according to the DIN 4113/VBG 70 specifications.
Pas en stock, livrable sous 5 jours ouvrés.
5 jours ouvrés
200,00 €
This FD 34 truss is 75 centimetres long and provides you with endless possibilities when it comes to realising creative ideas. With this truss section, you're guaranteed optimal quality for your production.
Pas en stock, livrable sous 5 jours ouvrés.
5 jours ouvrés
158,00 €
This FD34 square truss has a length of 29 centimetres and with a weight of 1.75 kilograms, this lightweight section is incredibly easy to use. It's been TUV-tested according to DIN 70 4113/VBG specifications.
Pas en stock, livrable sous 5 jours ouvrés.
5 jours ouvrés
137,00 €
This FD34 square truss has a length of 25 centimetres and with a weight of 3 kilograms, this lightweight section is incredibly easy to use. It's been TUV-tested according to DIN 70 4113/VBG specifications.
Pas en stock, livrable sous 5 jours ouvrés.
5 jours ouvrés
135,00 €
This FD 34 truss is 1.25 metres long and provides you with endless possibilities when it comes to realising creative ideas. With this truss section, you're guaranteed optimal quality for your production.
Pas en stock, livrable sous 5 jours ouvrés.
5 jours ouvrés
244,00 €
This FD 34 square corner has twice a length of 1 metre and an angle of 135 degrees. It's been TUV-tested according to the DIN 4113/VBG 70 specifications.
Pas en stock, livrable sous 5 jours ouvrés.
5 jours ouvrés
206,00 €
This FD 34 square X-part has been TUV-tested according to DIN 4113/VBG 70 specifications. The square truss X-part is made of a highly stable aluminium alloy.
Pas en stock, livrable sous 5 jours ouvrés.
5 jours ouvrés
323,00 €
This FD34 square truss has a length of 50 centimetres and with a weight of 3 kilograms, this lightweight section is incredibly easy to use. It's been TUV-tested according to DIN 70 4113/VBG specifications.
Pas en stock, livrable sous 6 jours ouvrés.
6 jours ouvrés
141,00 €
Bax-shop.fr | Semaines All Inclusive : chaque semaine de nouvelles