Duratruss DT 33 Duratruss

37 produits trouvés
Afficher par:
Popu
laire
This Duratruss Spacer is suited for DT 31, 32, 33, 34, 43, 44 truss systems and has a length of 105 millimetres. It connects DT parts and creates more space between them.
En stock
En stock
15,40 €
Popu
laire

L'embase de la marque Duratruss est très solide, elle vous permet de construire de grands totems ou colonnes de scène. Cette plaque mesure 80 x 80 cm et pèse 10 kg, ce qui la rend facile à transporter.

En stock
En stock
177,00 €
Popu
laire
The Duratruss DT 33 has main tubes with a diameter of 50 mm and cross tubes of 20 mm and their wall thickness is 2 mm. This DT 33 has a length of 1.0 metres.
En stock
En stock
112,00 €
Popu
laire

Le Duratruss DT 33 a des tubes principaux d’un diamètre de 50 mm et des tubes transversales d’un diamètre de 20 mm. L’épaisseur est de 2 mm. Ce DT 33 truss a une longueur de 1,5 mètres.

En stock
En stock
135,00 €
The Duratruss DT 33 has main tubes with a diameter of 50 mm and bracing with a 20mm diameter - each tube has a wall thickness of 2 millimetres. This C32-LU truss has two 0.5m parts in an angle of 90 degrees plus a straight part that goes up.
En stock
En stock
176,00 €
-58%
This Spacer is suited for the DT 33 and DT 44 truss systems and has a length of 121.5 millimetres. A Spacer gives a truss section more space, so that you can make a neatly sealed truss system.
En stock
En stock
8,65 €

The DT33 series is one of the best selling truss systems. Its great load capacity and lightweight construction have made the series highly popular. The DT33 BPM base plate is fitted with male connectors.

Pas en stock, livrable sous 4 jours ouvrés.
4 jours ouvrés
50,00 €

La série DT33 est l'un des systèmes truss les plus vendus. La capacité de charge élevée et la construction légère ont rendu cette série très célèbre. Voici l'embase murale DT33 avec des connexions femelles.

En stock
En stock
49,00 €
The Duratruss DT 33 has main tubes with a diameter of 50 mm and bracing with a 20mm diameter - each tube has a wall thickness of 2 millimetres. This part consists of two tubes of 50 cm that have a 90-degree angle.
En stock
En stock
119,00 €
The Duratruss DT 33 has main tubes with a diameter of 50 mm and bracing with a 20mm diameter - each tube has a wall thickness of 2 millimetres. This T-section has a length of 0.5 metres.
En stock
En stock
172,00 €
The Duratruss DT 33 has main tubes with a diameter of 50 mm and bracing with a 20mm diameter - each tube has a wall thickness of 2 millimetres. The C23-L135 consists of two 50-centimetre pieces in a 90-degree angle.
En stock
En stock
119,00 €
The Duratruss DT 33 has main tubes with a diameter of 50 mm and cross tubes of 20 mm and their wall thickness is 2 mm. This DT 33 has a length of 0.5 metres.
En stock
En stock
95,00 €
The Duratruss DT 33 has main tubes with a diameter of 50 mm and bracing with a 20mm diameter. Each tube has a wall thickness of 2 millimetres. This DT 33 truss has two 0.5m parts in an angle of 90 degrees plus a straight part that goes down.
En stock
En stock
177,00 €
The Duratruss DT 33 has main tubes with a diameter of 50 mm and bracing with a 20mm diameter - each tube has a wall thickness of 2 millimetres. This DT 33 truss has two 0.5m parts in an angle of 90 degrees plus a straight part that goes down.
En stock
En stock
177,00 €
The Duratruss DT 33 has main tubes with a diameter of 50 mm and bracing with a 20mm diameter - each tube has a wall thickness of 2 millimetres. This part consists of two 50cm tubes that have a 120-degree angle.
Pas en stock, livrable sous 4 jours ouvrés.
4 jours ouvrés
119,00 €
The Duratruss DT 33 has main tubes with a diameter of 50 mm and bracing with a 20mm diameter - each tube has a wall thickness of 2 millimetres. This DT 33 X-section allows for the connection of four other truss parts.
Pas en stock, livrable sous 4 jours ouvrés.
4 jours ouvrés
204,00 €
The Duratruss DT 33 has main tubes with a diameter of 50 mm and bracing with a 20mm diameter - each tube has a wall thickness of 2 millimetres. This section consists of two tubes of 50 cm that have a 90-degree angle.
Pas en stock, livrable sous 4 jours ouvrés.
4 jours ouvrés
115,00 €
The Duratruss DT 33 T38 is a T-section from one of the most popular truss systems. It enjoys such great popularity thanks to the combination of a high weight capacity and a lightweight design.
Pas en stock, livrable sous 4 jours ouvrés.
4 jours ouvrés
172,00 €
The Duratruss DT 33 has main tubes with a diameter of 50 mm and bracing with a 20mm diameter - each tube has a wall thickness of 2 millimetres. The C31-LU consists of two 50cm tubes in a 90-degree angle and a 50cm tube that goes upwards.
Pas en stock, livrable sous 4 jours ouvrés.
4 jours ouvrés
176,00 €
The Duratruss DT 33 has main tubes with a diameter of 50 mm and bracing with a 20mm diameter - each tube has a wall thickness of 2 millimetres. This C45-LUD has two 0.5m parts in an angle of 90 degrees, plus a straight part that goes up and a straight part that goes down.
Pas en stock, livrable sous 4 jours ouvrés.
4 jours ouvrés
200,00 €
The Duratruss DT 33 has main tubes with a diameter of 50 mm and bracing with a 20mm diameter - each tube has a wall thickness of 2 millimetres. This T37-TD T-section has a length of 0.5 metres.
Pas en stock, livrable sous 4 jours ouvrés.
4 jours ouvrés
174,00 €
The Duratruss DT 33 has main tubes with a diameter of 50 mm and bracing with a 20mm diameter - each tube has a wall thickness of 2 millimetres. This part consists of two 1-metre pieces in a 60-degree angle.
Pas en stock, livrable sous 4 jours ouvrés.
4 jours ouvrés
162,00 €
The Duratruss DT 33 has main tubes with a diameter of 50 mm and bracing with a 20mm diameter - each tube has a wall thickness of 2 millimetres. This part consists of two tubes of 50 cm that have a 135-degree angle.
Pas en stock, livrable sous 4 jours ouvrés.
4 jours ouvrés
105,00 €
The Duratruss DT 33 has main tubes with a diameter of 50 mm and bracing with a 20mm diameter - each tube has a wall thickness of 2 millimetres. This T43-TU T-section has a length of 0.5 metres and can placed in between vertical trusses.
Pas en stock, livrable sous 4 jours ouvrés.
4 jours ouvrés
301,00 €
The Duratruss DT 33 has main tubes with a diameter of 50 mm and bracing with a 20mm diameter - each tube has a wall thickness of 2 millimetres. This T43-TU T-section has a length of 0.5 metres and can be placed on a vertical truss.
Pas en stock, livrable sous 4 jours ouvrés.
4 jours ouvrés
216,00 €
The Duratruss DT 33 has main tubes with a diameter of 50 mm and bracing with a 20mm diameter - each tube has a wall thickness of 2 millimetres. This T42-TD T-section has a length of 0.5 metres, that allows for the placement of a vertical truss.
Pas en stock, livrable sous 4 jours ouvrés.
4 jours ouvrés
220,00 €
The Duratruss DT 33 has main tubes with a diameter of 50 mm and bracing with a 20mm diameter - each tube has a wall thickness of 2 millimetres. This DT33 C53-XD X-section allows for the placement of a vertical, upright truss.
Pas en stock, livrable sous 4 jours ouvrés.
4 jours ouvrés
300,00 €
The Duratruss DT 33 has main tubes with a diameter of 50 mm and bracing with a 20mm diameter - each tube has a wall thickness of 2 millimetres. This DT33 C61-XUD X-section allows for the placement of vertical, upright trusses.
Pas en stock, livrable sous 4 jours ouvrés.
4 jours ouvrés
337,00 €
The Duratruss DT 33 has main tubes with a diameter of 50 mm and bracing with a 20mm diameter - each tube has a wall thickness of 2 millimetres. This DT33 C52-XU X-section allows for the placement of a vertical, upright truss.
Pas en stock, livrable sous 4 jours ouvrés.
4 jours ouvrés
300,00 €
The Duratruss DT 33 has main tubes with a diameter of 50 mm and bracing with a 20mm diameter - each tube has a wall thickness of 2 millimetres. This DT 33 truss has two 0.5m parts in an angle of 90 degrees plus a straight part that goes up and a straight part that goes down.
Pas en stock, livrable sous 4 jours ouvrés.
4 jours ouvrés
232,00 €
The DT-BPS 650 baseplate has been developed for the DT 33, 34, 43, and 44 truss systems by Duratruss. This round baseplate has a diameter of 65 cm, is 1.5 cm thick and features four half truss eggs - perfect for truss totems or a truss square.
Pas en stock, livrable sous 4 jours ouvrés.
4 jours ouvrés
317,00 €
The Duratruss DT 33 has main tubes with a diameter of 50 mm and bracing with a 20mm diameter - each tube has a wall thickness of 2 millimetres. This part consists of two 1-metre pieces in a 45-degree angle.
Pas en stock, livrable sous 4 jours ouvrés.
4 jours ouvrés
121,00 €
Pas en stock, livrable sous 4 jours ouvrés.
4 jours ouvrés
241,00 €
This Duratruss DT 33 truss part is 0.75 metres long and, when combined with other DT 33 parts, offers a wide range of possibilities. With a high weight capacity, it can effortlessly support your lighting and audio equipment.
Pas en stock, livrable sous 7 jours ouvrés.
7 jours ouvrés
94,00 €
The Duratruss DT 33 has main tubes with a diameter of 50 mm and bracing with a 20mm diameter - each tube has a wall thickness of 2 millimetres. This C61-XU T-section has a length of 0.5 metres.
Livrable sous 4 semaines.
4 semaines
172,00 €
En
Promo
The Duratruss DT 33 has main tubes with a diameter of 50 mm and bracing with a 20mm diameter - each tube has a wall thickness of 2 millimetres. The C23-L135 consists of two 50-centimetre pieces in a 90-degree angle.
En stock
En stock
95,00 €
En
Promo
The Duratruss DT 33 has main tubes with a diameter of 50 mm and bracing with a 20mm diameter. Each tube has a wall thickness of 2 millimetres. This DT 33 truss has two 0.5m parts in an angle of 90 degrees plus a straight part that goes down.
En stock
En stock
115,00 €
Bax-shop.fr | Trustpilot